Gloss protects metal, wood and plastics indoor/outdoor. Clean base with alcohol before spraying. Urethane varnish are water resistant and generally used in car paint protection. Seal porous material in mold making similar in application as shellac on plaster mother mold.
Directions for use:
- Shake can thoroughly until metal agitator moves freely for at least 1 minute.
- Remove plastic cap.
- Hold container at least 8cm or 15cm away from article to be sprayed; point spray head opening towards objects to be sprayed, holding can vertically, depress spray valve with forefinger and move spray back and forth so that an even film of paint is deposited. Several thin coats allowing each coat to dry for 10 minutes at least are better than one heavy coat.
- Sprayhead can be cleared by pulling out of valve opening.
