When used with the Adhesion Promoter, Maker Pro Paints™ will bond tenaciously to various rigid substrates –
including: rigid urethanes, rigid urethane foams, epoxy plastics, wood, fiberglass, aluminum, concrete, plasters,
steel, and more.
Here is a link to the Maker Pro Paints main page with highlights about the products:
https://www.smooth-on.com/product-line/maker-pro-paint/
FOR PAINTING RIGID SUBSTRATES & SURFACES:
FOR ALL SURFACES: All surfaces to be painted must be entirely free of dust, dirt, oil, grease, and other contaminants.
Remove all loose chalking or flaking paint from the surface. Clean using isopropyl alcohol.
1) Sand the surface to be painted with 320-grit sandpaper or a coarse scuff pad. Dry sand only.
After sanding, clean surfaces using isopropyl alcohol and allow substrate to air dry completely.
2) Apply one thin coat of Maker Pro Paint™ Adhesion Promoter and let air dry for 30 minutes to a uniform
sheen before applying paint.
Maker Pro Paints Technical Bulletin:
https://www.smooth-on.com/tb/files/MAKER_PRO_PAINT_TB.pdf
Most appropriate for theme park displays, props, robotics painting.
Packing:8 oz
Repacked : 40g+-
