Tekbond repositionable spray glue bonds a wide variety of materials has excellent transparency and a high covering power. It is recommended for applications that need precision and a high performance without waste. It is an adhesive that allows the applicator the possibility of repositioning the glued material several times without damaging the pieces or surfaces where they were glued.
- Bonds paper
- Cardboard
- Decoupage
- Fabric
- Plastic
- Leather
- Cork
- Non-woven
- Wood
- Carpet
How to use:
- All surfaces to be glued must be cleaned and free from dust, oil, loose paint, wax, moisture or grease.
- Shake the can well before use.
- For best results, the temperature of the adhesive and the surfaces to be glued must be at least 18°C.
- Secure the can in the upright position when spraying the adhesive.
- Fully squeeze the actuator, positioning the can 15-20cm away from the surface that encountered the adhesive.
- Put the parts together, pressing them down for at least 15 seconds.
- To avoid clogging, after use, turn the can over and press the valve until only gas comes out. That will prevent the obstruction.
- If necessary, you can clean the applicator tip with alcohol.
- As a repositionable glue best to secure adhesion with H20 covercoat varnish.
- Not suitable for Foam or glueing of heavy items
Spray adhesives will not wrinkle or entrap air bubbles as a repositionable adhesive . Ideal in book binding, tissue decoupage craft, paper quilling lay out, stenciling, labelling and more. To ensure firm contact use a bone folder to exert pressure and to level adhesion and a creasing folder to seam and folds. Similar in application to spray mount this repositionable spray adhesive is fast dry, does not run or drip, permit wide coverage.
Do not spray near open flame and store aerosol can in cool dry place.
